Generate HDL Code for FPGA Floating-Point Target Libraries

Mapping to a floating-point library enables you to synthesize your floating-point design without having to do floating-point to fixed-point conversion. Eliminating the floating-point to fixed-point conversion step reduces the loss of data precision, and enables you to model a wider dynamic range.

An FPGA floating-point library is a set of floating-point IP blocks that are optimized for synthesis on specific target hardware. Altera^® Megafunctions and Xilinx^® LogiCORE IP are examples of such libraries.

In the HDL Coder™ block library, a subset of Simulink^® blocks support floating-point library mapping. See HDL Coder Support for FPGA Floating-Point Library Mapping.

Setup for FPGA Floating-Point Library Mapping
Map to an FPGA Floating-Point Library
View Code Generation Reports of Floating-Point Library Mapping
Analyze Results of Floating-Point Library Mapping

Setup for FPGA Floating-Point Library Mapping

To map your floating-point design to an Altera or Xilinx FPGA floating-point library:

Set the target device options for your Altera or Xilinx FPGA synthesis tool using hdlset_param. For example, to set the synthesis tool as Altera Quartus II and chip family as Arria10:

hdlset_param(model,'SynthesisToolChipFamily','Arria10', ...
                   'SynthesisToolDeviceName','10AS066H2F34E1SG', ...
                   'SynthesisToolPackageName','', ...
                   'SynthesisToolSpeedValue','')

To set up the path to your synthesis tool executable file, use hdlsetuptoolpath. For example, to set the path to the Altera Quartus II synthesis tool:
```
hdlsetuptoolpath('ToolName','Altera Quartus II','ToolPath',...
 'C:\altera\14.0\quartus\bin\quartus.exe');
```
See Synthesis Tool Path Setup.
Set up your Altera or Xilinx FPGA floating-point simulation libraries. See FPGA Simulation Library Setup.

Map to an FPGA Floating-Point Library

You can map your Simulink model to floating-point target libraries from the Configuration Parameters dialog box or from the command line.

From the Configuration Parameters Dialog Box

To map to an FPGA floating-point library:

Open the Configuration Parameters dialog box.
In the HDL Code Generation > Global Settings > Floating Point Target tab, select the floating-point IP library.
For Xilinx LogiCORE^® IP, select XILINX LOGICORE as the library. For Altera megafunction IP, you can select ALTERA MEGAFUNCTION (ALTFP) or ALTERA MEGAFUNCTION (ALTERA FP FUNCTIONS) as the library.
If you choose ALTERA MEGAFUNCTION (ALTERA FP FUNCTIONS) as the library, the Initialize IP Pipelines to Zero option becomes available. Select the Initialize IP Pipelines to Zero option to initialize pipeline registers in the IP to zero. In the Target and Optimizations pane, enter the target frequency that you want the floating-point IP to map to.
When you choose the ALTERA FP FUNCTIONS library, an IP Configuration table appears. By using the data type table, you can customize the IP settings of the floating-point target library. For more information, see Customize the IP Latency with Target Frequency.
If you choose XILINX LOGICORE or ALTERA MEGAFUNCTION (ALTFP) as the library, select the Latency Strategy and Objective for the IP.
When you choose these libraries, an IP Configuration table appears. By using the data type table, you can customize the latency of the floating-point target IP. For more information, see Customize the IP Latency with Latency Strategy.
To share floating-point IP resources, on the HDL Code Generation > Target and Optimizations > Resource Sharing tab, make sure that Floating-point IPs is enabled. The number of floating-point IP blocks that get shared depends on the SharingFactor that you specify on the subsystem.
Click Apply. You can now generate HDL code from the Simulink model (see HDL Code Generation from a Simulink Model).

From the Command-Line

To generate HDL code from the command line, you can use the hdlcoder.createFloatingPointTargetConfig function to create a floating-point IP configuration.

By using the hdlcoder.createFloatingPointTargetConfig function, create a hdlcoder.FloatingPointTargetConfig object for the floating-point library. Then, use hdlset_param to save the configuration on the model.
For example, to create a floating-point target configuration for the ALTERA FP FUNCTIONS library with the default settings:
```
fpconfig = hdlcoder.createFloatingPointTargetConfig('ALTERAFPFUNCTIONS');
hdlset_param('sfir_single', 'FloatingPointTargetConfiguration', fpconfig);
```
You can customize the IP settings based on the floating-point library that you specify. For more information, see Customize Floating-Point IP Configuration.
Use makehdl to generate HDL code from the subsystem.

View Code Generation Reports of Floating-Point Library Mapping

To view the code generation reports of floating-point library mapping, before you begin code generation, enable generation of the Resource Utilization Report and Optimization Report. To learn how to generate these reports, see Create and Use Code Generation Reports.

Target-specific Report

To see the target floating-point block your design mapped to, the latency, and number of target-specific hardware resources, in the Code Generation Report, select Target-specific Report.

To learn more about the Resource Utilization report, see Resource Utilization Report.

Target Code Generation Report

In the Code Generation Report, the Target Code Generation section in the Optimization Report shows the status of optimization settings applied to the model. The report shows whether HDL Coder successfully generated floating-point target code.

To learn more about the Optimization report, see Optimization Report.

Analyze Results of Floating-Point Library Mapping

You can get the latency information of the floating-point target IP from the generated model after HDL code generation. For example, consider this add block in Simulink with inputs of double data type.

After HDL code generation, the optimization report for target code generation displays a link to a generated model. To see the floating-point target library that your Simulink block mapped to, double-click the subsystem in the generated model.
Double-click the ALT add block. The length of the delay block is the latency of the floating-point target IP.

To learn more about the generated model, see Generated Model and Validation Model.

To see your FPGA floating-point library mapping results, you can view the IP core files generated after HDL code generation.

HDL Coder checks and reuses existing generated IP core files, taking less time when successively generating code for the same floating-point target IP.

Documentation