interp1

1-D data interpolation (table lookup)

collapse all in page

Syntax

  • vq = interp1(x,v,xq)
    example
  • vq = interp1(x,v,xq,method)
    example
  • vq = interp1(x,v,xq,method,extrapolation)
    example
  • vq = interp1(v,xq)
    example
  • vq = interp1(v,xq,method)
  • vq = interp1(v,xq,method,extrapolation)
  • pp = interp1(x,v,method,'pp')

Description

example

vq = interp1(x,v,xq) returns interpolated values of a 1-D function at specific query points using linear interpolation. Vector x contains the sample points, and v contains the corresponding values, v(x). Vector xq contains the coordinates of the query points.

If you have multiple sets of data that are sampled at the same point coordinates, then you can pass v as an array. Each column of array v contains a different set of 1-D sample values.

example

vq = interp1(x,v,xq,method) specifies an alternative interpolation method: 'nearest', 'next', 'previous', 'linear','spline','pchip', or 'cubic'. The default method is 'linear'.

example

vq = interp1(x,v,xq,method,extrapolation) specifies a strategy for evaluating points that lie outside the domain of x. Set extrapolation to 'extrap' when you want to use the method algorithm for extrapolation. Alternatively, you can specify a scalar value, in which case, interp1 returns that value for all points outside the domain of x.

example

vq = interp1(v,xq) returns interpolated values and assumes a default set of sample point coordinates. The default points are the sequence of numbers from 1 to n, where n depends on the shape of v:

  • When v is a vector, the default points are 1:length(v).

  • When v is an array, the default points are 1:size(v,1).

Use this syntax when you are not concerned about the absolute distances between points.

vq = interp1(v,xq,method) specifies any of the alternative interpolation methods and uses the default sample points.

vq = interp1(v,xq,method,extrapolation) specifies an extrapolation strategy and uses the default sample points.

pp = interp1(x,v,method,'pp') returns the piece-wise polynomial form of v(x) using the method algorithm.

Examples

collapse all

Open Script

Define the sample points, x, and corresponding sample values, v.

x = 0:pi/4:2*pi;
v = sin(x);

Define the query points to be a finer sampling over the range of x.

xq = 0:pi/16:2*pi;

Interpolate the function at the query points and plot the result.

figure
vq1 = interp1(x,v,xq);
plot(x,v,'o',xq,vq1,':.');
xlim([0 2*pi]);
title('(Default) Linear Interpolation');

Now evaluate v at the same points using the 'spline' method.

figure
vq2 = interp1(x,v,xq,'spline');
plot(x,v,'o',xq,vq2,':.');
xlim([0 2*pi]);
title('Spline Interpolation');

Open Script

Define a set of function values.

v = [0  1.41  2  1.41  0  -1.41  -2  -1.41 0];

Define a set of query points that fall between the default points, 1:9. In this case, the default points are 1:9 because v contains 9 values.

xq = 1.5:8.5;

Evaluate v at xq.

vq = interp1(v,xq);

Plot the result.

figure
plot((1:9),v,'o',xq,vq,'*');
legend('v','vq');

Open Script

Define a set of sample points.

x = 1:10;

Define the values of the function, $v(x) = 5x + x^2i$, at the sample points.

v = (5*x)+(x.^2*1i);

Define the query points to be a finer sampling over the range of x.

xq = 1:0.25:10;

Interpolate v at the query points.

vq = interp1(x,v,xq);

Plot the real part of the result in red and the imaginary part in blue.

figure
plot(x,real(v),'*r',xq,real(vq),'-r');
hold on
plot(x,imag(v),'*b',xq,imag(vq),'-b');

Open Script

Define the sample points, x, and corresponding sample values, v.

x = [1 2 3 4 5];
v = [12 16 31 10 6];

Specify the query points, xq, that extend beyond the domain of x.

xq = [0 0.5 1.5 5.5 6];

Evaluate v at xq using the 'pchip' method.

vq1 = interp1(x,v,xq,'pchip')

vq1 =

   19.3684   13.6316   13.2105    7.4800   12.5600

Next, evaluate v at xq using the 'linear' method.

vq2 = interp1(x,v,xq,'linear')

vq2 =

   NaN   NaN    14   NaN   NaN

Now, use the 'linear' method with the 'extrap' option.

vq3 = interp1(x,v,xq,'linear','extrap')

vq3 =

     8    10    14     4     2

'pchip' extrapolates by default, but 'linear' does not.

Open Script

Define the sample points, x, and corresponding sample values, v.

x = [-3 -2 -1 0 1 2 3];
v = 3*x.^2;

Specify the query points, xq, that extend beyond the domain of x.

xq = [-4 -2.5 -0.5 0.5 2.5 4];

Now evaluate v at xq using the 'pchip' method and assign any values outside the domain of x to the value, 27.

vq = interp1(x,v,xq,'pchip',27)

vq =

   27.0000   18.6562    0.9375    0.9375   18.6562   27.0000
Open Script

Define the sample points.

x = (-5:5)';

Sample three different parabolic functions at the points defined in x.

v1 = x.^2;
v2 = 2*x.^2 + 2;
v3 = 3*x.^2 + 4;

Create matrix v, whose columns are the vectors, v1, v2, and v3.

v = [v1 v2 v3];

Define a set of query points, xq, to be a finer sampling over the range of x.

xq = -5:0.1:5;

Evaluate all three functions at xq and plot the results.

vq = interp1(x,v,xq,'pchip');
figure
plot(x,v,'o',xq,vq);

h = gca;
h.XTick = -5:5;

The circles in the plot represent v, and the solid lines represent vq.

Input Arguments

collapse all

Sample points, specified as a row or column vector of real numbers. The values in x must be distinct. The length of x must conform to one of the following requirements:

  • If v is a vector, then length(x) must equal length(v).

  • If v is an array, then length(x) must equal size(v,1).

Example: [1 2 3 4 5 6 7 8 9 10]

Example: 1:10

Example: [3 7 11 15 19 23 27 31]'

Data Types: single | double | duration | datetime

Sample values, specified as a vector, matrix, or array of real or complex numbers. If v is a matrix or an array, then each column contains a separate set of 1-D values.

Example: rand(1,10)

Example: rand(10,1)

Example: rand(10,3)

Data Types: single | double | duration | datetime
Complex Number Support: Yes

Query points, specified as a scalar, vector, matrix, or array of real numbers.

Example: 5

Example: 1:0.05:10

Example: (1:0.05:10)'

Example: [0 1 2 7.5 10]

Data Types: single | double | duration | datetime

Interpolation method, specified as a value from the table below.

MethodDescriptionContinuityComments
'linear'Linear interpolation. The interpolated value at a query point is based on linear interpolation of the values at neighboring grid points in each respective dimension. This is the default interpolation method.C0

  • Requires at least 2 points.

  • Requires more memory and computation time than nearest neighbor.

'nearest'Nearest neighbor interpolation. The interpolated value at a query point is the value at the nearest sample grid point. Discontinuous

  • Requires at least 2 points.

  • Modest memory requirements

  • Fastest computation time

'next'Next neighbor interpolation. The interpolated value at a query point is the value at the next sample grid point.Discontinuous

  • Requires at least 2 points.

  • Same memory requirements and computation time as 'nearest'.

'previous'Previous neighbor interpolation. The interpolated value at a query point is the value at the previous sample grid point.Discontinuous

  • Requires at least 2 points.

  • Same memory requirements and computation time as 'nearest'.

'pchip'Shape-preserving piecewise cubic interpolation. The interpolated value at a query point is based on a shape-preserving piecewise cubic interpolation of the values at neighboring grid points.C1

  • Requires at least 4 points.

  • Requires more memory and computation time than linear.

'cubic'

    Note:   The behavior of interp1(...,'cubic') will change in a future release. In a future release, this method will perform cubic convolution.

Same as 'pchip'.C1This method currently returns the same result as 'pchip'.
'v5cubic'Cubic convolution used in MATLAB® 5.C1Points must be uniformly spaced. 'cubic' will replace 'v5cubic' in a future release.
'spline'Spline interpolation using not-a-knot end conditions. The interpolated value at a query point is based on a cubic interpolation of the values at neighboring grid points in each respective dimension.C2

  • Requires at least 4 points.

  • Requires more memory and computation time than 'pchip'.

Extrapolation strategy, specified as 'extrap' or a real scalar value.

  • Specify 'extrap' when you want interp1 to evaluate points outside the domain using the same method it uses for interpolation.

  • Specify a scalar value when you want interp1 to return a specific constant value for points outside the domain.

The default behavior depends on the input arguments:

  • If you specify the 'pchip' or 'spline' interpolation methods, then the default behavior is 'extrap'.

  • All other interpolation methods return NaN by default for query points outside the domain.

Example: 'extrap'

Example: 5

Data Types: char | single | double

Output Arguments

collapse all

Interpolated values, returned as a scalar, vector, matrix, or array. The size of vq depends on the shape of v and xq.

Shape of vShape of xqSize of VqExample
VectorVectorsize(xq)If size(v) = [1 100]
and size(xq) = [1 500],
then size(vq) = [1 500].
VectorMatrix
or N-D Array		size(xq)If size(v) = [1 100]
and size(xq) = [50 30],
then size(vq) = [50 30].
Matrix
or N-D Array		Vector[length(xq) size(v,2),...,size(v,n)]If size(v) = [100 3]
and size(xq) = [1 500],
then size(vq) = [500 3].
Matrix
or N-D Array		Matrix
or N-D Array		[size(xq,1),...,size(xq,n),... size(v,2),...,size(v,m)]If size(v) = [4 5 6]
and size(xq) = [2 3 7],
then size(vq) = [2 3 7 5 6].

Piecewise polynomial, returned as a structure that you can pass to the ppval function for evaluation.

See Also

| | |

Introduced before R2006a

Was this topic helpful?
MATLAB Documentation
Other Documentation
Support